Static load testing machine

As a type of protective equipment, the mechanical properties of seat belts and safety ropes are crucial. The national standard GB/T 6095-2009 specifies their testing methods, with the universal testing machine being the main testing equipment. The static load test of seat belts and safety ropes uses a universal material testing machine with a range generally less than 50kN and an accuracy level of 1. The inspection method for seat belts using a tensile testing machine is to conduct load tests on all components and the entire body of the seat belt. Divided into two parts: static load and impact test.
1. Static load test and requirements
1.1 All components of the seat belt (including the belt, rope, metal fittings, and stitching used) and the surrounding rod belt and rope shall undergo static load testing as a whole, in accordance with the provisions of Article 5.1 of GB6095-85 "Seat Belts". Only after passing the test can they be assembled into a seat belt. The overall fence or rope must undergo a static load test of 4412.7N (450kgf) before mass production can begin.
1.2 One 49000N (5t) tensile testing machine for testing equipment; 1 980.6N (100kg) tensile testing machine; One test stand; One 0.5t winch; One set of overall static load test device

Product Tags:

Static load testing machine for rubber

      

Rubber testing equipment with warranty

      

Static load tester for materials

      

Static load testing machine Images